T-shaped Ejecting Needles
T-shaped ejecting needles are specialized and must be used when the needle module is upgraded. The upgraded module supports to place multiple T-shaped ejecting needles depending on the die dimension and aspect ratio.
Applications
1.T-shaped ejecting needles are designed and made of tungsten carbide material.
2.Chinatungsten Online is able to provide variant kinds of T-shaped ejecting needles based on the requested spec of length, diameter, tip radius and structure design depending on the custom-upgraded module structure, which allows to place multiple needles with almost the same height to push up dies successfully.
Main Specifications
Main Specifications |
||
Parameter |
Specifications |
Remark |
Diameter |
0.5-1.0 mm (+/- 0.05 mm) |
Standard |
Length |
7-23 mm (+/- 0.01 mm) |
Customized |
Taping Angle |
8-20 degree (+/- 1 degree) |
Customized |
Tip Radius R |
25-300 um |
Customized |
Product Specifications
Main Specifications |
|||
Length |
Diameter |
Taping angle |
Tip Radius |
10 |
0.5 |
15 |
150 |
15.74 |
0.7 |
10 |
150 |
23 |
1.0 |
8 |
27 |
23 |
1.0 |
8 |
200 |
23 |
1.0 |
8 |
300 |
10 |
0.5 |
15 |
50 |
10 |
0.5 |
15 |
100 |
10 |
0.5 |
20 |
50 |
7 |
0.7 |
20 |
25 |
7 |
0.7 |
20 |
50 |
10 |
0.9 |
0 |
300 |
10 |
0.9 |
10 |
50 |
10 |
0.9 |
10 |
300 |
If there is any interest in tungsten products, please feel free to contact us through the following methods.
Email: sales@chinatungsten.com
Tel.: +86 592 512 9696/+86 592 512 9595
More info>>